169
8. SETTING
8.2.2 Function settings
Assign the functions to the switches and buttons and set the rules to reset the data.
Use the [Page 1] and [Page 2] buttons from the function buttons. The display is changed.
Page 1
Reset
Set the operation after resetting.
• Default test course
Select the test mode that will start automatically after clicking the [Reset] button from the
following selections.
• SemiAuto
• P1 - P5 course
• Standard course
The customer can set "P1 - P5 course". For registering the course, refer to
"6.3.2 CUSTOMIZE THE TEST PROCEDURE" on P.146.
• Auto file Import after press [CL].
Place a check mark for this item. After clicking the [Reset] button, the output file from the
customer's external software will be automatically imported.
To Next Page
Loading...
Need help?
General
