19
1. BEFORE USE
(3) Forehead rest knob................. The position of the forehead rest can be adjusted by mov-
ing this knob backward/ forward.
(4) Leveling knob.......................... Levels the measuring head.
(5) Near-point rod holder.............. The near-point rod is inserted and attached here.
(6) Clamp screw ........................... Retains the near-point rod.
(7) Forehead rest.......................... The patient's forehead rests here.
(8) Cornea alignment scale .......... Measures the corneal vertex position.
(9) Level ....................................... Indicates the horizontal position for the level adjustment.
(10) Face shield.............................. The patient's face rests here.This cover can be removed.
(11) Cornea illumination ................. Illuminates the anterior eye segment to check the PD easily
even during examination in a dark room.
(12) Near-point illumination ............ Illuminates the near-point target.
(13) Tilt locking lever ...................... Adjusts the angle of the tilted measuring head and fixes it.
(14) Arm mounting shaft................. Mounts the instrument on the arm, etc.
(15) PD cover ................................. The cover for holding when tilting the head.
COMPOSITION OF PARTS WHICH CONTACT THE HUMAN BODY
Forehead rest : Polypropylene resin (Type B applied part)
Face shield : Polypropylene resin
To Next Page
Loading...
Need help?
General
