Topcon Compu-Vision CV-5000 User Manual

54
3. BASIC OPERATIONS
3. BASIC OPERATIONS
3.1 FLOW OF OPERATIONS
3.2 PREPARATION BEFORE MEASUREMENT
3.2.1 PREPARATION FOR TEST
1 Turn on the power and start the software.
Press the power switches of the power supply unit and personal computer to turn on
them and start the CV-5000 software through the personal computer.
When you want to perform the tests on condition that the power is already ON,
start the CV-5000 software.
When the CV-5000 software has already started, click the [Reset] button to reset
the system.
2 Set the measuring head in front of the patient.
Wipe the forehead rest, examination window and face shield prior to placing the patient
behind the instrument.
CAUTION
To avoid electric shock, do not touch the external connection terminal
and the patient at the same time.
(Refer to "3.3".)
(Refer to "3.3".)
(Refer to "3.3".)
(Refer to "3.5".)
(Refer to "3.6".)
(Refer to "3.2.1".)
(Refer to "3.2.2".)
Turn on the power
Data input
Test
Select the test chart and execute the test.
Select the program course and execute the test.
Select the test name and execute the test.
Printing
Resetting

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English