Topcon Compu-Vision CV-5000 User Manual

65
5. OPERATION FOR TESTS
5. OPERATION FOR TESTS
This chapter will explain the tests and operations that can be performed with the CV-5000 instru-
ment.
This manual will explain the operation when the ACP-8 (A) is used as the far-point chart
and NC-3 (E), as the near-point chart in the test.
5.1 VISUAL ACUITY TEST/SPHERICAL POWER/CYLIN-
DER POWER CORRECTION
5.1.1 VISUAL ACUITY MEASUREMENT
Measure the patient's visual acuity.
1 Select a visual acuity chart.
To perform the visual acuity measurement, select the visual acuity chart icon from the
chart page.
In near-point test, select a proper target from the near-point card targets manually.
Example of the test chart icons on chart page
Far-point
chart
Far-point test chart icon Near-point
chart
Near-point test chart icon
ACP-8(A) NC-3(E)

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English