170
8. SETTING
Print
Set the [Print] button operation.
• Action
You can set "Print", "Output data" or "Print and output data" by clicking the [Print] button.
• Printout
• Data export
• Printout & data export
• Reset after press [Print].
Place a check mark for this item. After clicking the [Print] button, the system is automati-
cally reset.
Mouse Operation
Set the action of mouse operation.
• Options with selecting chart icon
Set the action for "LEFT Click" and "RIGHT Click".
• Change chart_test
• Change chart only
• Value control with mouse wheel
Set the action for "Forward" and "Backward".
• +/BO/BU
• -/BI/BD
• Move cursor automatically to the operation buttons area.
Place a check mark for this item. When you select a test chart icon from the chart page,
the mouse cursor moves to the operation buttons area automatically.
Default
This button returns the system to the factory initial setting when shipped.
Page 1/Page 2
These buttons are used to switch the page1/ page2.
OK/Cancel
Click the [OK] button. The changed data is saved and the "Settings" menu appears again.
Click the [Cancel] button. The changed data is canceled and the "Settings" menu appears
again.
To Next Page
Loading...
Need help?
General
