Topcon Compu-Vision CV-5000 User Manual

175
8. SETTING
Addition lens
Set the input and change of ADD.
• Link with Far spherical.
Set whether ADD should be linked with the change of the far-point spherical power after
inputting ADD. Place a check mark for this item, and the link operation is done.
• Allow to input MINUS value for addition.
Select whether it should be permitted to set 0.00D or less for the ADD power. Place a
check mark for this item, and it will be functional in the minus direction.
Default
This button returns the system to the factory initial setting when shipped.
Page 1/Page 2
These buttons change the page for changing the setting.
OK/Cancel
Click the [OK] button. The new setting will be saved and the "Settings" menu appears
again.
Click the [Cancel] button. The new changes will be canceled and the "Settings" menu
appears again.

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English