Topcon Compu-Vision CV-5000 User Manual

188
8. SETTING
RM/CL data folder
Set the data folder when capturing the data from RM or CL.
You can select this button when a check mark is placed for "Enable network connection" on
"LAN configuration".
RM data folder configuration
Set the RM data folder.
• Use pre installed shared folder
Place a check mark for this item when capturing the RM data to the common folder in the
CV system itself or in an other CV system within the same network.
The common folder is provided as a standard equipment in the CV system.
• IP address of RM data stations
When a check mark is placed for "Use pre-installed shared folder in CV system", this item
is validated.
When using the common folder in the CV system itself, input its IP address.
When using the common folder in an other CV system within the network, input the IP
address of the CV system.
• Path to the shared folder
When a check mark is not placed for "Use pre-installed shared folder", this item is vali-
dated.
Specify the network path of the common folder where the RM data is saved.
• User name
When a check mark is not placed for "Use pre-installed shared folder", this item is vali-
dated.
Specify the user name to access the common folder where the RM data is saved.
• Password
When a check mark is not placed for "Use pre-installed shared folder", this item is vali-
dated.
Specify the password to access the common folder where the RM data is saved.

Topcon Compu-Vision CV-5000 Specifications

General

Brand	Topcon
Model	Compu-Vision CV-5000
Category	Medical Equipment
Language	English