EasyManua.ls Logo

Topcon HiPer Plus - Page 33

Topcon HiPer Plus
184 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Getting Acquainted
1-866-4TOPCON www.topconpositioning.com
1-11
with the reference station information (i.e., location and
description) to the rover modem.
Your HiPer+ may be equipped with one of the following
communication boards (however, your receiver may also
be configured without a radio/modem):
UHF modem – a Pacific Crest PDL (Positioning
Data Link) modem; either a 450–470 MHz or 430–
450 MHz; receiving only.
Spread Spectrum – either a 915 MHz or 2.4 GHz
modem.
GSM – dual-band, dual-user cell phone frequency
modem (Europe and Japan: 900/1800 MHz; USA
and Canada: 900/1900 MHz).
Broadcast data receiver – a TPS-BDR
communication board for receiving differential
corrections from DGPS radio beacons and
geostationary L-band satellites broadcasting
OmniStar® data.
The Base station operator is responsible for complying
with local regulations for radio operation. In the US, the
FCC regulates the use of radio transmitters, requiring a
license. Broadcasting without a license can result in
severe penalties including the confiscation of your radio
and GPS+ equipment. Please call TPS Customer Support
if you need advice on obtaining the proper license in the
USA.
The internal PDL radio modem comes with a number of
preset frequencies programmed at TPS.
WARNING
The use of these preset frequencies without
a license is illegal. Contact your local

Table of Contents

Related product manuals