Timer
The timer selection menu controls up to three
programmable timer positions. The timer positions
can either all take place on one weekday or can be
distributed between different weekdays or weekday
ranges.
Weekday ranges, e.g.
Monday – Friday: 5 x heat
Monday – Sunday : 7 x heat
If a programmed weekday range is activated, all the
days of the week are processed in turn as long as
the timer is active. Renewed programming is not
necessary.
NOTE!
- If the timer is activated with a programmed
weekday range Monday – Friday on Sunday, the
heater heats from the following Monday to Friday
with the set defaults. (5x heating)
- If the timer is activated with a programmed
weekday range Monday – Friday on Wednesday,
the heater heats on Wednesday, Thursday and
Friday. In the following week, operation is
continued with the set defaults on Monday and
Tuesday. (5x heating)
- When a weekday range has been processed, the
time position has to be reactivated for the
following week.
The heater starts on the selected day on reaching
the set starting time.
156
Other controls
Operator comfort
To Next Page
Loading...
