Fuel filter/Water sep
- Interval: This shows the value of fuel filter/
water separator interval with in the unit hours.
The operator can adjust fuel filter/water
separator interval. The setting range is 50 ~
500 hours.
- Time remaining: This shows the value for
remaining time for next fuel filter/water
separator service.
When the "Time remaining" reaches 40 h, 20
h, and 0 h, the check screen with "Time
remaining" and "Interval" will pop up on the IC
(Instrument Cluster). Service the maintenance
items which should be serviced in that interval.
For the service interval and maintenance
items, see page
367
.
- Reset time remaining?: After servicing the
maintenance items, the time can be reset.
Press ESC button to "Cancel " or SELECT
button to "Yes". When the time is reset, the
next service interval and "Time remaining" will
be displayed.
If operator does not maintain the parts and
reset this value it turns to zero and then to
negative.
V1137881
Service
Fuel filter/Water sep
450h
Fuel filter/Water sep
Interval: 500h
Set interval
Fuel filter/Water sep
Set interval:
500h
V1137882
Fuel filter/Water sep
Time remaining: 450h
V1140746
Reset time remaining?
Yes
52
Instrument panels
Display unit
To Next Page
Loading...
