WILLTEK 4403 - Page 369

Appendix A SCPI Command Reference
MEASure subsystem
WCDMA Options Version 6.20
347
:
MEASure:WCDMa[:CONTinuous]:UEReport:TXPOwer
:MEASure:WCDMa[:CONTinuous]:UEReport:RTTDifference
:MEASure:WCDMa[:CONTinuous]:UEReport:TRCH:BLER
:MEASure:WCDMa:ARRay:RFTX:FREQuency
Description
Reports the path loss between Node B and UE, estimated by the UE.
Query
The query form of this command will return a string containing the floating point
value with the result.
Example
:MEAS:WCDM:UER:PLOS?
Starts the measurement and returns the result, e.g.
61.
Syntax
:MEASure:WCDMa[:CONTinuous]:UEReport:TXPOwer
Parameters
There are no parameters.
Description
Reports the UE transmit power.
Query
The query form of this command will return a string containing the floating point
value with the result.
Example
:MEAS:WCDM:UER:TXPO?
Starts the measurement and returns the result, e.g. 66
.
Syntax
:MEASure:WCDMa[:CONTinuous]:UEReport:RTTDifference
Parameters
There are no parameters.
Description
Reports the UE measured RX-Time-Difference between UL and DL signal.
Query
The query form of this command will return a string containing the floating point
value with the result.
Example
:MEAS:WCDM:UER:RTTD?
Starts the measurement and returns the result, e.g.
1056.
Syntax
:MEASure:WCDMa[:CONTinuous]:UEReport:TRCH:BLER
Parameters
There are no parameters.
Description
Reports the UE estimated BLER value for the Transport Channel defined with
CONFigure:WCDMa:MEASure:UEReport:TRCH.
Query
The query form of this command will return a string containing the floating point
value with the result
.
Example
:MEAS:WCDM:UER:TRCH:BLER?
Starts the measurement and returns the result, e.g.
5.
Syntax
:MEASure:WCDMa:ARRay:RFTX:FREQuency <Int1>