WILLTEK 4403 - Page 376

Appendix A SCPI Command Reference
MEASure subsystem
354 WCDMA Options Version 6.20
:MEASure:WCDMa:ARRay:RFRX:BER:RATIo
:MEASure:WCDMa:ARRay:RFRX:BLER:RATIo
:MEASure:WCDMa:ARRay:UEReport:ALL
Query
The query form of this command will perform the measurement the specified number
of times (int1 parameter). As soon as all measurements have been completed, all
measurement result values will be returned in a string. The string delivered will con-
tain (25 * int1) floating point real numbers. The physical dimension is dBc.
The single measurement results are separated by commas.
Example
:MEAS:WCDM:ARR:RFSP:ACLR 10
:FETCh:WCDMA:RFSP:ACLR
The string returned in this example would contain 50 floating point real numbers,
representing the 5 measurement result values of 10 measurement runs.
Syntax
:MEASure:WCDMa:ARRay:RFRX:BER:RATIo <Int1>
Parameters
Int1 is an integer. The minimum value for Int1 is 0, the maximum value is 100.
The default value is 0.
Description
Performs a BER measurement as many times as specified.
Query
The query form of this command will perform the measurement the specified number
of times, and return the results.
Example
:MEAS:WCDM:ARR:RFRX:BER? 100
Syntax
:MEASure:WCDMa:ARRay:RFRX:BLER:RATIo <Int1>
Parameters
Int1 is an integer. The minimum value for Int1 is 0, the maximum value is 100.
The default value is 0.
Description
Performs a BLER measurement as many times as specified.
Query
The query form of this command will perform the measurement the specified number
of times, and return the results.
Example
:MEAS:WCDM:ARR:RFRX:BLER? 100
Syntax
:MEASure:WCDMa:ARRay:UEReport:ALL
Parameters
There are no parameters.
Description
Starts an array measurement of all available UE Report tests.