PROCEDURE
1 Remove the cover (003, Figure 6-16).
2 Do a check of the thrust bearing housing.
3 If necessary, remove particles from the area (001).
4 Make sure th the channel (002) is clear.
5 Install the cover (003).
Fig 6-16 Visual examination
CLOSE UP
• None
X72DF
AA00-1203-00AAA-310A-A
Maintenance Manual Thrust bearing - examine the housing
Winterthur Gas & Diesel Ltd.
- 133 - Issue 002 2020-10
To Next Page
Loading...
Need help?
General
