10.7 Flow limiting valve
10.7.1 Flow limiting valve - do an inspection
Periodicity
Description
Working hours 12000 (if MGO is used)
Working hours 6000 (if other fuel is used)
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 0.5 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Intermediate 1
Support equipment
Description Part No. CSN QTY
None
Supplies
Description QTY
Scotchbrite™ A/R
WD40® or similar A/R
Oil A/R
Never Seez NSBT A/R
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
• None
PRELIMINARY OPERATIONS
• The engine must be stopped and made safe for maintenance, refer to section 4.1 Do
maintenance work - general procedure
• Only qualified personnel are permitted to do this procedure.
X72DF
AA00-5565-00AAA-281A-A
Maintenance Manual Flow limiting valve - do an inspection
Winterthur Gas & Diesel Ltd.
- 600 - Issue 002 2020-10
To Next Page
Loading...
Need help?
General
