13.1.2 HP servo oil pipe - grind the sealing face
Periodicity
Description
Unscheduled
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 0.5 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Support equipment
Description Part No. CSN QTY
Grinding tool 94841 1
Supplies
Description QTY
Compound grade No. 200 A/R
Compound grade No. 500 A/R
Spare Parts
Description Part No. CSN QTY
O-ring 1
SAFETY PRECAUTIONS
• None
PRELIMINARY OPERATIONS
• The servo oil pipe must be removed, refer to section 13.1.1 HP servo oil pipe - remove
X72DF
AA00-8447-00AAA-655A-A
Maintenance Manual HP servo oil pipe - grind the sealing face
Winterthur Gas & Diesel Ltd.
- 724 - Issue 002 2020-10
To Next Page
Loading...
Need help?
General
