WinGD X62DF - Guide Shoes - Remove

66 Attach the chain blocks (001, 004) to the eye bolt on one of the guide shoes.
67 Operate the chain blocks (001, 004) to put a light tension on the chains.
68 Remove the chain block (002).
69 Operate the chain blocks (001, 004) to move the guide shoe (003) through the door
frame.
70 Lower the guide shoe (003) on to the platform.
71 Remove the chain block (004) from the eye bolt on the guide shoe (003).
72 Do Step 64 to Step 71 for the other guide shoe.
73 If necessary, move the guide shoe (00X) as follows:
73.1 Attach the sling and the chain block (004) to the trolley (005).
73.2 Attach the chain block (004) to the eye bolt on the guide shoe (003).
73.3 Operate the chain block (004) to lift the guide shoe (003).
73.4 Move the trolley (005) and guide shoe (003) to an applicable area.
73.5 Lower the guide shoe (003) on an applicable surface.
73.6 Remove the chain block (004) from the eye bolt on the guide shoe (003).
Fig 8-56 Guide shoes - remove
004
001
002
003
005
003
00751
CLOSE UP
• None
X62DF
AA00-3326-00AAA-520A-A
Maintenance Manual Crosshead - remove
Winterthur Gas & Diesel Ltd.
- 456 - Issue 002 2020-10