14.1 Crank angle sensor unit
14.1.1 Crank angle sensor unit (supply unit) - remove the proximity
sensor
Periodicity
Description
Unscheduled
Duration for performing preliminary requirements 0.0 man-hours
Duration for performing the procedure 0.5 man-hours
Duration for performing the requirements after job completion 0.0 man-hours
Personnel
Description Specialization QTY
Engine crew Basic AR
Support equipment
Description Part No. CSN QTY
None
Supplies
Description QTY
None
Spare Parts
Description Part No. CSN QTY
None
SAFETY PRECAUTIONS
WARNING
Injury Hazard: Before you operate the turning gear, make sure that no personnel are near
the flywheel, or in the engine.
PRELIMINARY OPERATIONS
• The engine must be stopped and made safe for maintenance, refer to section 4.1 Do
maintenance work - general procedure
X72DF
AA00-9223-00AAA-520A-A
Maintenance Manual Crank angle sensor unit (supply unit) - remove the proximity
sensor
Winterthur Gas & Diesel Ltd.
- 778 - Issue 002 2020-10
To Next Page
Loading...
Need help?
General
