WinGD X62DF - Page 750

Fig 13-10 HP fuel pipe - install
8 Attach the clamp (003, Figure 13-11) to the flat bar (002) with the bolts (004), washers
and nuts (005).
9 Torque the bolts (004).
10 Install the insulation (001) to the HP injection pipe.
11 Connect the electrical connection (007) to the injection valve (006).
X62DF
AA00-8733-00AAA-720A-A
Maintenance Manual HP fuel pipe (fuel rail to injection valve) - install
Winterthur Gas & Diesel Ltd.
- 750 - Issue 002 2020-10