Xerox Phaser 4600 Service Manual

04/2016
4-58
Phaser 4600/4620/4622 Printer Service Manual
REP 7.47, REP 7.48
Revised
4 Repairs and Adjustments
REP 7.47 HCF Feed Drive Assembly
Parts List on PL 7.25 Item 28
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Cover removal is possible without removing the feeder from the printer.
1. Remove the HCF rear cover, REP 7.38.
2. Remove the HCF right cover, REP 7.39.
3. Remove the HCF Feed Clutch, REP 7.46.
4. Disconnect CN1 from the feed motor and remove 5 screws (metal) that secure the
assembly to the chassis, Figure 1.
Figure 1 Remove the Feed Drive Assembly
REP 7.48 HCF Feed Motor
Parts List on PL 7.25 Item 20
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
NOTE: Cover removal is possible without removing the feeder from the printer.
1. Remove the HCF rear cover, REP 7.38.
2. Remove the HCF right cover, REP 7.39.
3. Disconnect CN1 from the feed motor and remove 4 screws (metal) that secure the motor
to the drive assembly, Figure 1.
Figure 1 Remove the Feed Motor

Xerox Phaser 4600 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Monthly Duty Cycle	Up to 275, 000 pages
Maximum Paper Capacity	3, 750 sheets
Processor	533 MHz
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet 10/100/1000Base-T
Memory	256 MB
Maximum Paper Size	8.5 x 14 inches
Print Languages	PCL 6, PostScript 3
Duplex Printing	Standard
Weight	25.9 kg