04/2016
4-116
Phaser 4600/4620/4622 Printer Service Manual
REP 10.17, REP 10.18
Revised
4 Repairs and Adjustments
REP 10.17 Fuser Release Drive Assembly
Parts List on PL 4.10 Item 3
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Disconnect P/J23 from the Fuser Release Drive Assembly,
5. Remove 3 screws (Gold, metal) that secure the Release Drive Assembly to the chassis,
Figure 1.
Figure 1 Remove the Fuser Release Drive Assembly
REP 10.18 Duplex Unit Detect Sensor
Parts List on PL 10.25 Item 25
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Release 3 hooks that secure the sensor to the left side tray guide.
5. Disconnect P/J25 to remove the sensor, Figure 1.
Figure 1 Remove the Duplex Unit Detect Sensor
To Next Page
Loading...
Need help?
General
