Xerox Phaser 4600

04/2016
5-34
Phaser 4600/4620/4622 Printer Service Manual
PL 10.25
Revised
5 Parts List
PL 10.25 Duplex Unit Assembly
Item Part Description
1 – Duplex lower frame (P/O PL 10.25
Item 26)
2 – Duplex upper frame (P/O PL 10.25
Item 26)
3 – Duplex align guide (P/O PL 10.25
Item 26)
4 – Bottom duplex ground (P/O PL
10.25 Item 26)
5 – Duplex feed brush ground (P/O PL
10.25 Item 26)
6 – Duplex gasket ground (P/O PL
10.25 Item 26)
7 – PTT label (P/O PL 10.25 Item 26)
8 – Information label (P/O PL 10.25
Item 26)
9 – Cassette cover (P/O PL 10.25 Item
26)
10 – Tension spring (P/O PL 10.25 Item
18)
11 023N01051 Timing belt (REP 10.19)
12 – M-feed bush (P/O PL 10.25 Item
26)
13 – Conductive gasket (P/O PL 10.25
Item 26)
14 – P terminal ground (P/O PL 10.25
Item 26)
15 – Exit F gear (P/O PL 10.25 Item 26)
16 – Idle roll shaft (P/O PL 10.25 Item
26)
17 – Pulley-18 (P/O PL 10.25 Item 26)
18 – Pulley-M-18-dummy (P/O PL 10.25
Item 26)
19 – Idle roller (P/O PL 10.25 Item 26)
20 – Static eliminator (P/O PL 10.25 Item
26)
21 – Paper guide stud (P/O PL 10.25
Item 26)
22 – Sponge cover (P/O PL 10.25 Item
26)
23 – ELA unit roller 1 (P/O PL 10.25 Item
26)
24 – ELA unit roller 2 (P/O PL 10.25 Item
26)
25 130N01628 Duplex unit detect sensor (REP
10.18)
26 022N02484 Duplex unit assembly (REP 10.1)