Xerox Phaser 4600 Service Manual

04/2016
5-20
Phaser 4600/4620/4622 Printer Service Manual
PL 8.20
Revised
5 Parts List
PL 8.20 Optional Feeder Pick-up
Assembly
Item Part Description
1 – Feed roll frame (P/O PL 8.20 Item
17)
2 130N01628 Tray 3 no paper sensor (Q07-310),
Tray 4 no paper sensor (Q07-410),
Tray 5 no paper sensor (Q07-501),
Tray 6 no paper sensor (REP 7.35)
Tray 3 Stack Height Sensor (Q07-350)
Tray 4 Stack Height Sensor (Q07-450)
Tray 5 Stack Height Sensor (Q07-550)
Tray 6 Stack Height Sensor (Q07-650)
(REP 7.37) (see NOTE 2)
3 – No paper sensor actuator (P/O PL
8.20 Item 17) (REP 7.36)
4 022N02232 Feed roller (order 3)
5 – Idle gear (P/O PL 8.20 Item 17)
6 – One way gear (P/O PL 8.20 Item
17)
7 – Bearing (P/O PL 8.20 Item 17)
8 – Feed roll shaft (P/O PL 8.20 Item
17)
9 – Static eliminator (P/O PL 8.20 Item
17)
10 – Ground strip (P/O PL 8.20 Item 17)
11 – Feed joint gear (P/O PL 8.20 Item
17)
12 – Idle gear (P/O PL 8.20 Item 17)
13 – Not used
14 – Housing (P/O PL 8.20 Item 17)
15 – Tray up limit switch (P/O PL 8.20
Item 17) (see NOTE 2)
16 – Bearing (P/O PL 8.20 Item 17)
17 050K74180 Feed assembly
NOTE: 1. Order the entire 520-Sheet Feeder using Service
part number 050K74180 or Sales part number 097N01874.
NOTE: 2. The component control codes are dependent on
the machine configuration.

Xerox Phaser 4600 Specifications

General

Print Technology	Laser
Print Resolution	Up to 1200 x 1200 dpi
Monthly Duty Cycle	Up to 275, 000 pages
Maximum Paper Capacity	3, 750 sheets
Processor	533 MHz
Supported Operating Systems	Windows, Mac OS, Linux
Connectivity	USB 2.0, Ethernet 10/100/1000Base-T
Memory	256 MB
Maximum Paper Size	8.5 x 14 inches
Print Languages	PCL 6, PostScript 3
Duplex Printing	Standard
Weight	25.9 kg