Xerox Phaser 4600

04/2016
4-83
Phaser 4600/4620/4622 Printer Service Manual
REP 9.3, REP 9.4
4 Repairs and Adjustments
Revised
REP 9.3 Waste Toner Cartridge Detect Sensor
Parts List on PL 9.15 Item 6
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Release 3 hooks that secure the sensor to the bias cover.
5. Disconnect P/J30 to remove the sensor, Figure 1.
Figure 1 Remove the Waste Toner Cartridge Detect Sensor
REP 9.4 Left Side Chassis Fan
Parts List on PL 9.15 Item 3
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Duplex Unit, REP 10.1.
2. Remove the Waste Toner Cartridge.
3. Remove the Left Cover, REP 28.3.
4. Release 1 screw that secures the fan to the duct.
5. Disconnect P/J33 to remove the fan, Figure 1.
Figure 1 Remove the Left Side Chassis Fan