Xerox Phaser 4600

04/2016
4-103
Phaser 4600/4620/4622 Printer Service Manual
REP 10.13
4 Repairs and Adjustments
Revised
Figure 5 Disconnect the Thermostat
8. Remove 1 screw (Black, plastic) that secures the lamp bracket to the Fuser, Figure 6.
Figure 6 Remove the right side lamp bracket
9. Remove 2 screws (Silver, metal) that secure the Fuser left cover, Figure 7.
Figure 7 Remove the Fuser left cover
10. Disconnect the Heat Lamp from the 2 terminals (T3, T4) and remove, Figure 8.
Figure 8 Remove the Heat Lamp