Xerox Phaser 4600 - 17-200-00 Network Cable Disconnected RAP

04/2016
2-72
Phaser 4600/4620/4622 Printer Service Manual
17-120-00, 17-200-00
Revised
2 Status Indicator RAPS
17-120-00 Server Not Found RAP
17-120-00 The designated server is not found.
Initial Actions
• Check network configuration.
Procedure
Cycle system power.
17-200-00 Network Cable Disconnected RAP
17-200-00 Network cable is not connected.
Initial Actions
• Check the network connection.
NOTE: The network connection has two LEDs The green LED on indicates that the net-
work connection is ready. The amber LED flashing indicates that the network is good.
Procedure
Reseat the network cable to the IP Board.