Print-Quality Troubleshooting 5-11
Streaks or Lines Down the Print
There are several possible causes of
streaks running down the length of a
print.
Step Questions and Actions Yes No
1
1. Check for and remove any media, jammed
paper, or debris found in the printers exit
path.
2. Did this correct the problem?
Complete. Go to Step 2.
2
1. Clean the maintenance kit wiper blade or
replace the maintenance kit.
2. Did this correct the problem?
Complete. Go to Step 3.
3
1. Check the exit area, exit frame, the
preheater, maintenance kit, and the
printhead (including the paper release blade)
to see if there is anything touching the drum
assembly.
2. Reseat any printer component interfering or
touching the drum assembly.
3. Clean the paper release blade.
4. Did this correct the problem?
Complete. Go to Step 4.
s8500-035
To Next Page
Loading...
Need help?
General