Service Parts Disassembly 8-53
X-Axis Motor Assembly
(PL 4.5)
1. Remove the Right Side Cover from the printer (see page 8-6).
2. Disconnect the wiring harness.
3. Remove four screws securing the motor to the chassis and remove the motor.
Replacement Note:
Note
When reinstalling the X-Axis motor, ensure that the fork, extending out from the
side of the cone nut on the motor shaft, is engaged with the side rail.
s8500-108
Side Rail
X-Axis Motor
To Next Page
Loading...
Need help?
General