Xerox Phaser 8400 Service Manual

3-8 Phaser 8400/8500/8550 Color Printer
PEST Error Reporting
PEST tests occur after POST tests have been run and PostScript has been initialized.
PEST checks the connections and operation of various printer components.
Error codes for PEST tests are displayed on the Control Panel and are all in the
37,XXX.xx series. For troubleshooting PEST error codes, "37,0XX.xx Errors - PEST
Faults" on page 3-41.
16.04 Flutter only Soft Real-time clock does not tick. 11.4
Soft Trickle charge failure 11.5
17.01 Flutter and
then 17
blinks
Hard Memory test, less than 128 MB of RAM
detected. This is the minimum RAM
required. Add more RAM. Reseat the RAM
SODIMM(s), then replace the RAM
SODIMM(s).
13.1
18.01 Flutter and
then 18
blinks
Hard IPCB ID read failure.
18.02 Flutter and
then 18
blinks
Hard IPCB ID mismatch.
18.03 Flutter and
then 18
blinks
Hard IPCB PCI configuration failure.
18.04 Flutter only Soft IPCB version mismatch.
19.01 Flutter and
then 19
blinks
Hard Check and reseat cables. Replace hard
drive, if necessary.
POST Error Reporting Blink Pattern Definition Table (Continued)
8400
Control
Panel
Error
Code
PS, PE and
Control
Panel LEDs
(for 8400)
POST
Error
Type Description
8500/
8550
Control
Panel
Error
Code

Xerox Phaser 8400 Specifications

General

Brand	Xerox
Model	Phaser 8400
Category	Printer
Language	English