9.1 System Backup with NX100
9-3
Removing the CF or disconnecting the control power supply while writing data to
the CF/reading data from the CF may cause data corruption in the CF.
Please DO NOT remove the CF or disconnect the control power supply
while
• the remaining bytes indication is switching to the file list window after the data
of the external memory device is saved, loaded, or verified, and the hourglass
icon disappears.
• the screen is switching to the file list window after the data of the external
memory device is deleted.
• the folder list is being updated after a folder is created to or deleted from a
folder of the external memory.
• the message "Under running auto backup is being displayed.
• CMOS.BIN is being saved with the message "Saving system data. Don’t turn
the power off" displayed.
• CMOS.BIN is being loaded with the message "Loading system data. Don’t
turn the power off" displayed.
NOTE
To Next Page
Loading...
