Zte ZXR10 GER - Page 230

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
208 Confidential and Proprietary Information of ZTE CORPORATION
1.To turn on the debugging information switch for OSPF, use
debug ip ospf adj in Exec mode as shown in
Table 255.
TABLE 255 DEBUG IP OSPF COMMAND
Command
Format
Command
Mode
Command Function
debug ip ospf adj Exec
This turns on debugging
information switch for
returning OSPF adjacency
events
Result: This sets debugging information switch for returning
OSPF adjacency events.
2. To turn on for debugging OSPF switch packets, use debug ip
ospf packet command in OSPF in Exec mode as shown in
Table 256.
TABLE 256 DEBUG IP OSPF PACKET
Command
Format
Command
Mode
Command Function
debug ip ospf
packet
Exec
This turns on the debugging
information switch for
returning OSPF packet
sending/receiving events and
monitors the sending and
receiving of all OSPF packets
Result: This turn on debugging for OSPF packets.
3. To turn on debugging information for OSPF LSA, use debug
ip ospf lsa-generation command in Exec mode as shown in
Table 257.
TABLE 257 DEBUG IP OSPF LSA GENERATION
Command
Format
Command
Mode
Command Function
debug ip ospf
lsa-generation
Exec
This turns on debugging
information switch for
returning OSPF LSA
generation events
Result: This turns on debugging information for OSPF LSA.
4.To turn on debugging information for important OSPF events,
use debug ip ospf events command in Exec mode as
shown in
Table 258.
TABLE 258 DEBUG IP OSPF EVENTS
Command
Format
Command
Mode
Command Function
debug ip ospf
Exec
This turns on debugging