116 CHAPTER 6: IP SERVICES COMMANDS
Usage — Clearing the system IP address can interfere with system tasks
that use the system IP address, including the following:
■ Mobility Domain operations
■ Topology reporting for dual-homed MAP access points
■ Default source IP address used in unsolicited communications such as
AAA accounting reports and SNMP traps
Examples — To clear the system IP address, type the following
command:
WX1200# clear system ip-address
success: change accepted.
See Also
■ “display system” on page 42
■ “set system ip-address” on page 155
clear timezone Clears the time offset for the wireless LAN switch’s real-time clock from
Coordinated Universal Time (UTC). UTC is also know as Greenwich Mean
Time (GMT).
Syntax —
clear timezone
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — To return the WX switch’s real-time clock to UTC, type the
following command:
WX4400# clear timezone
success: change accepted.
See Also
■ “clear summertime” on page 115
■ “set summertime” on page 153
■ “set timedate” on page 156
■ “set timezone” on page 157
To Next Page
Loading...
