3Com 3CRWX120695A - Display Mobility-Domain Config; Display Mobility-Domain Status

display mobility-domain config 225
Examples — The following command clears a Mobility Domain member
with the IP address 192.168.0.1:
WX1200# clear mobility-domain member 192.168.0.1
See Also
■ “set mobility-domain member” on page 226
display
mobility-domain
config
Displays the configuration of the Mobility Domain.
Syntax — display mobility-domain config
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command displays the Mobility Domain
configuration:
WX4400# display mobility-domain config
This WX is a member, with seed 192.168.14.6
See Also
■ “clear mobility-domain” on page 223
■ “set mobility-domain member” on page 226
■ “display mobility-domain status” on page 225
display
mobility-domain
status
On the seed WX, displays the Mobility Domain status and members.
Syntax — display mobility-domain status
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.