3Com 3CRWX120695A - Help

help 509
■ d: — Nonvolatile storage area containing boot partition 1 (secondary).
■ e: — Primary partition of the flash card in the flash card slot.
■ f: — Secondary partition of the flash card in the flash card slot.
■ boot0: — Boot partition 0.
■ boot1: — Boot partition 1.
■ filename — System image filename.
Defaults — None.
Access — Boot prompt.
History — Introduced in MSS Version 3.0.
Usage — To display the image filenames, use the dir command. This
command does not list the boot code versions. To display the boot code
versions, use the version command.
Examples — The following command displays the system image version
installed in boot partition 1:
boot> fver boot1
File boot1:default version is 3.0.1.
See Also
■ “dir” on page 506
■ “version” on page 514
help Displays a list of all the boot prompt commands or detailed information
for an individual command.
Syntax —
help [command-name]
■ command-name — Boot prompt command.
Defaults — None.
Access — Boot prompt.
History — Introduced in MSS Version 3.0.