3Com 3CRWX120695A - Clear Location Policy

clear location policy 171
Examples — The following command removes Web AAA for SSID
research and userglob temp*@thiscorp.com:
WX4400# clear authentication web ssid research
temp*@thiscorp.com
See Also
■ “clear authentication admin” on page 165
■ “clear authentication console” on page 166
■ “clear authentication dot1x” on page 167
■ “clear authentication last-resort” on page 168
■ “clear authentication mac” on page 169
■ “display aaa” on page 180
■ “set authentication web” on page 201
clear location policy Removes a rule from the location policy on a WX switch.
Syntax — clear location policy rule-number
■ rule-number — Index number of a location policy rule to remove
from the location policy.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Usage — To determine the index numbers of location policy rules, use
the display location policy command. Removing all the ACEs from the
location policy disables this function on the WX switch.
Examples — The following command removes location policy rule 4
from an WX switch’s location policy:
WX4400# clear location policy 4
success: clause 4 is removed.