472 CHAPTER 18: FILE MANAGEMENT COMMANDS
See Also
■ “load config” on page 474
■ “save config” on page 478
display version Displays software and hardware version information for an WX switch
and, optionally, for any attached MAP access points.
Syntax —
display version [details]
■ details — Includes additional software build information and
information about the MAP access points configured on the WX
switch.
Defaults — None
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays version information for a
WX switch:
WX1200# display version
Mobility System Software, Version: 3.0.1
Copyright (c) 2004 3Com Corporation. All rights reserved.
Build Information: (build#168) TOP 2004-09-23 08:35:00
Model: WX1200
Hardware
Mainboard: version 1 ; FPGA version 0
PoE board: version 0 ; FPGA version 0
Serial number M8WE48BB8C7A0
Flash: 3.0.0.549 - md0a
Kernel: 3.0.0#130: Thu Sep 23 05:45:24 PDT 2004
BootLoader: 1.4 / 3.0.2
To Next Page
Loading...
