344 CHAPTER 11: IGMP SNOOPING COMMANDS
clear igmp statistics Clears IGMP statistics counters on one VLAN or all VLANs on a wireless
LAN switch and resets them to 0.
Syntax —
clear igmp statistics [vlan vlan-id]
■ vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, IGMP statistics are cleared for all VLANs.
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
Examples — The following command clears IGMP statistics for all
VLANs:
WX1200# clear igmp statistics
IGMP statistics cleared for all vlans
See Also — “display igmp statistics” on page 352
display igmp Displays IGMP configuration information and statistics.
Syntax — display igmp [vlan vlan-id]
■ vlan vlan-id — VLAN name or number. If you do not specify a
VLAN, MSS displays IGMP information for all VLANs.
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Examples — The following command displays IGMP information for
VLAN orange:
WX1200# display igmp vlan orange
VLAN: orange
IGMP is enabled
Proxy reporting is on
Mrouter solicitation is on
Querier functionality is off
Configuration values: qi: 125 oqi: 300 qri: 100 lmqi: 10 rvalue: 2 Multicast
To Next Page
Loading...
