238 CHAPTER 9: MANAGED ACCESS POINT COMMANDS
display {ap | dap}
counters
Displays MAP access point and radio statistics counters.
Syntax —
display ap counters [port-list [radio {1 | 2}]]
Syntax — display dap counters [dap-num [radio {1 | 2}]]
■ port-list — List of ports connected to the MAP access point(s) for
which to display statistics counters.
■ dap-num — Number of a Distributed MAP for which to display
statistics counters.
■ radio 1 — Shows statistics counters for radio 1.
■ radio 2 — Shows statistics counters for radio 2. (This option does not
apply to single-radio models.)
Defaults — None.
Access — All.
History — Introduced in MSS Version 3.0.
Usage — To display statistics counters and other information for
individual user sessions, use the display sessions network command.
Examples — The following command shows statistics counters for an
MAP access point on port 6:
WX1200# display ap counters 6
Port: 6 radio: 1
=================================
LastPktXferRate 2 PktTxCount 91594255
NumCntInPwrSave 4294966683MultiPktDrop 0
LastPktRxSigStrength -54 MultiBytDrop 0
LastPktSigNoiseRatio 40 User Sessions 5
TKIP Pkt Transfer Ct 0 MIC Error Ct 0
TKIP Pkt Replays 0 TKIP Decrypt Err 0
CCMP Pkt Decrypt Err 0 CCMP Pkt Replays 0
CCMP Pkt Transfer Ct 0 RadioResets 0
TxUniPkt TxUniByte RxPkt RxByte UndcrptPkt
TxMultiPkt TxMultiByte UndcrptByte
PhyError
1.0: 164492 0 9631741 0 405041 8913512 0 0 13963
2.0: 603 0 248716 0 191103 4608065 0 0 30547
5.5: 370594 52742 27616521 4445625 2427 133217 0 0 723
To Next Page
Loading...
