3Com 3CRWX120695A - Import a Site Survey; Plan RF Coverage; Add Wiring Closets

display snmp configuration 127
See Also
■ “clear ntp server” on page 113
■ “clear summertime” on page 115
■ “clear timezone” on page 116
■ “display timezone” on page 131
■ “set ntp” on page 147
■ “set ntp server” on page 148
■ “set summertime” on page 153
■ “set timezone” on page 157
display snmp
configuration
Shows SNMP settings on a wireless LAN switch.
Syntax — display snmp configuration
Default — None.
Access — All.
History — Introduced in MSS Version 3.0.
NTP Server IP address of the NTP server.
Peer state State of the NTP session from the point of view of the NTP
server:
■ CORRECT
■ REJECT
■ SELCAND
■ SYNCCAND
■ SYSPEER
Local state State of the NTP session from the point of view of the WX
switch’s NTP client:
■ INITED
■ START
■ SYNCED
Table 33 Output for display ntp (continued)
Field Description