370 CHAPTER 12: SECURITY ACL COMMANDS
Examples — The following commands commit all the security ACLs in
the edit buffer to the configuration, display a summary of the committed
ACLs, and show that the edit buffer has been cleared:
WX4400# commit security acl all
configuration accepted
WX4400# display security acl
ACL table
ACL Type Class Mapping
----------------------- ---- ------ -------
acl_123 IP Static
acl_124 IP Static
WX4400# display security acl info all editbuffer
acl editbuffer information for all
See Also
■“clear security acl” on page 366
■“display security acl” on page 370
■“display security acl info” on page 372
■“rollback security acl” on page 379
■“set security acl” on page 380
display security acl Displays a summary of security ACLs that are committed — saved in the
running configuration and nonvolatile storage — or a summary of ACLs
in the edit buffer.
Syntax —
display security acl [editbuffer]
Defaults — None.
Access — Enabled.
History — Introduced in MSS Version 3.0.
To Next Page
Loading...
