3Com 3CRWX120695A - Page 231

MAP Access Point Commands by Usage 231
“set radio-profile auto-tune channel-interval” on page 278
“set radio-profile auto-tune power-backoff- timer” on
page 279
“set radio-profile auto-tune power-config” on page 280
“set radio-profile auto-tune power-interval” on page 281
“set {ap | dap} radio auto-tune max-power” on page 266
“set {ap | dap} radio auto-tune max- retransmissions” on
page 267
“set {ap | dap} radio min-client-rate” on page 270
“display auto-tune neighbors” on page 248
“display auto-tune attributes” on page 246
Radio State “set {ap | dap} radio mode” on page 271
Dual Homing “set {ap | dap} bias” on page 261
Load Balancing “set {ap | dap} group” on page 263
“display {ap | dap} group” on page 242
MAP
Administration and
Maintenance
“set {ap | dap} name” on page 264
“set {ap | dap} blink” on page 262
“set {ap | dap} upgrade-firmware” on page 275
“reset {ap | dap}” on page 260
“set {ap | dap} radio channel” on page 269
“set {ap | dap} radio tx-power” on page 273
“clear {ap | dap} radio” on page 232
“display {ap | dap} group” on page 242
“display {ap | dap} status” on page 243
“display {ap | dap} counters” on page 238
“display dap global” on page 251
“display dap connection” on page 250
“display dap unconfigured” on page 253
“display {ap | dap} etherstats” on page 240
Table 43 Map Access Point Commands by Usage (continued)
Type Command