3Com SuperStack II Guide

Displaying and Changing Bridging/VLANs Information 117
The following prompt is displayed:
Enter VLAN ID (2-4094) [3]:
2
Enter the number of the VLAN ID that you wish to create. The default
option is the lowest value within the VLAN ID range not currently used in
the stack.
The following prompt is displayed:
Enter Local ID (1-16) [3]:
3
Enter the local ID to be associated with the VLAN. The default option is
the lowest value within the Local ID range not currently used in the stack.
The following prompt is displayed:
Enter VLAN Name [VLAN 3]:
4
Enter the name for the VLAN. The VLAN name can be a maximum of 32
characters, including spaces. The default VLAN name is VLAN x, where x
is the VLAN ID.
Deleting a VLAN
You can delete a VLAN using the
delete
command on the VLAN menu.
To delete a VLAN:
1
At the Top-level menu, enter:
bridge vlan delete
The following prompt is displayed:
Select VLAN ID (2-4094):
2
Enter the VLAN ID that you wish to delete. If the VLAN contains member
ports, a warning message is displayed that asks you to confirm deletion
of the VLAN.
Displaying Detailed
VLAN Information
You can display detailed information about a VLAN, specifically port
membership and statistics, for each Switch unit in the stack that is a
member of the specified VLAN using the
detail
command on the VLAN
menu.
To display detailed VLAN information:
1
At the Top-level menu, enter:
bridge vlan detail

3Com SuperStack II Specifications

General

Brand	3Com
Model	SuperStack II
Category	Switch
Language	English