3Com SuperStack II Guide

86 C
HAPTER
3: W
ORKING
W
ITH THE
W
EB
I
NTERFACE
5
To place the port in another VLAN, repeat steps 1 to 4 with that VLAN.
To place a port back in the
Available Ports
listbox, click the port in the
VLAN Members listbox and click the
<< Remove
button.
The
VLAN Members
listbox displays two types of port that do not use
802.1Q tagging: untagged ports and VLT tagged ports. These ports
cannot be moved from the VLAN using the VLAN Setup page:
■
To remove an untagged port from a VLAN, change its VLAN allocation
using the
Untagged VLAN
listbox on the Port Setup page.
■
VLT tagged ports belong to all VLANs. To remove a VLT tagged port
from a VLAN, specify that the port is no longer VLT tagged using the
VLT Tagging
listbox on the Port Setup page.
Setting Up Roving
Analysis Ports
You can set up roving analysis ports for the stack using the Roving
Analysis Setup page.
To access the page:
1
Click the
Configuration
icon on the side-bar.
2
Click the
Roving Analysis
hotlink. The Roving Analysis Setup page is
displayed as shown in Figure 23
.
Figure 23
The Roving Analysis Setup page

3Com SuperStack II Specifications

General

Brand	3Com
Model	SuperStack II
Category	Switch
Language	English