3Com SuperStack II - Page 98

98 C
HAPTER
4: W
ORKING
W
ITH THE
C
OMMAND
L
INE
I
NTERFACE
■
Feature menu
This menu contains commands that allow you to configure Roving
Analysis Port, enable or disable Broadcast Storm Control, set up or
remove resilient links, and configure Trunks on the Switch.
■
IP menu
This menu contains commands that allow you to view and change
IP-related information for the stack and ping other devices in your
network. It also allows you to reset the IP configuration back to
factory defaults.
■
SNMP menu
This menu contains commands that allow you to view and change
SNMP-related information for the stack.
■
System menu
This menu contains commands that allow you to view and configure
information about the Switch units in the stack or the stack as a
whole.