ABB IRB 14000 - Page 266

NoteAction
xx1500000499
Remove the hall sensor by removing the
screws and washers.
3
Refitting the hall sensor
Use these procedures to refit the hall sensor.
Refitting the axis-4 hall sensor
NoteAction
Hall sensor with attachment for axis 4:
3HAC052450-001
Refit the hall sensor with the screws and
washers.
1
Screws: 3HAB3409-241 (1 pc).
Tightening torque: 0.4 Nm.
xx1500000499
Continues on next page
266 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.5.5 Replacing the axis-4 hall sensor
Continued