ABB IRB 14000 - Page 300

Refitting the covers
NoteAction
Screws: 3HAC050368-005 (3 pcs).Refit the upper axis-3 cover.1
Tightening torque: 0.14 Nm.
xx1500000093
Screws: 3HAC050368-005 (2 pcs).Refit the axis-3 body cover.2
Tightening torque: 0.14 Nm.
xx1500000091
Screws: 3HAC050368-005 (4 pcs).Remove the lower axis-4 cover.3
Tightening torque: 0.14 Nm.
xx1400002756
Continues on next page
300 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.6.4 Replacing the axis-3 mechanical stop
Continued