NoteAction
xx1500000424
Remove two attachment screws.3
Gently pull out the EtherNet switch and the holder
to remove the latches from the recesses.
4
Disconnect the connector:
• A33.X1
• A33.X6
• A33.X5
5
Pull out the EtherNet switch from the holder.6
Refitting the EtherNet switch
Use this procedure to refit the EtherNet switch.
Refitting the EtherNet switch
NoteAction
Ethernet switch 5p: 3HAC034884-
001
Fit the new ethernet switch in the holder.1
Connect the connectors:
• A33.X1
• A33.X5
• A33.X6
2
Gently push the holder latches into the recesses.3
xx1500000424
Tighten two attachment screws.4
Connect the connectors:
• A33.X2 (X2)
• A33.X3 (X3)
5
Continues on next page
374 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.12 Replacing the EtherNet switch
Continued
To Next Page
Loading...
