ABB IRB 14000 - Page 375

Refitting the body cover
NoteAction
Screws: M3x16 8.8 (8 pcs)Refit the body cover with the attachment
screws.
1
Tightening torque: 0.9 Nm
xx1500000303
Screws: M3x6 8.8-A2F (2 pcs).Refit the attacment screws.2
Tightening torque: 0.2 Nm
xx1500000525
CAUTION
Make sure all safety requirements are met
when performing the first test run. These
are further detailed in the section DANGER
- First test run may cause injury or damage!
on page 53.
3
Product manual - IRB 14000 375
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.12 Replacing the EtherNet switch
Continued