ABB IRB 14000 - Page 398

NoteAction
B
A
xx1500000728
Attachment screwA
DeviceNet master boardB
Remove the attachment screw on the DeviceNet
master bracket.
3
Gently pull the board straight out.
CAUTION
Always grip the board around the edges to avoid
damage to the board or its components.
4
ELECTROSTATIC DISCHARGE (ESD)
Immediately put the board in an ESD safe bag or
similar.
Refitting the DeviceNet master
Refitting the DeviceNet master
NoteAction
DANGER
Make sure that all supplies for electrical power
and air pressure are turned off.
1
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit please read the safety information in the
section WARNING - The unit is sensitive to ESD!
on page 55
2
Continues on next page
398 Product manual - IRB 14000
3HAC052983-001 Revision: D
© Copyright 2015 - 2016 ABB. All rights reserved.
4 Repair
4.7.15 Replacing the DeviceNet master
Continued