Agilent 4155C/4156C SCPI Command Reference, Edition 1 5-37
SCPI Commands
:HCOPy:DESTination
This command does not have query form.
This command has no *RST state and you must use this command before printing or
plotting.
Syntax :HCOPy:DESTination PARallel | RDEVice | NET1 | NET2 | NET3 | NET4 |
MMEMory
Parameter
Example OUTPUT @Hp4155;":HCOP:DEST RDEV"
See also :MMEMory:NAME
:SYSTem:COMMunicate:NETwork[:SELF]
:SYSTem:COMMunicate:NETwork:PRINter:NET
:SYSTem:COMMunicate:NETwork:PRINter:SET
Parameter Type Explanation
PARallel character parallel port
RDEVice character GPIB port
NET1 character printer set by :SYST:COMM:NET:PRIN:SET NET1
or assigned to the top softkey for the PRINTER field
on the SYSTEM: MISCELLANEOUS screen.
NET2 character printer set by :SYST:COMM:NET:PRIN:SET NET2
or assigned to the second softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
NET3 character printer set by :SYST:COMM:NET:PRIN:SET NET3
or assigned to the third softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
NET4 character printer set by :SYST:COMM:NET:PRIN:SET NET4
or assigned to the fourth softkey for the PRINTER
field on the SYSTEM: MISCELLANEOUS screen.
MMEMory character Not make hardcopy. Outputs to a file in the mass
storage device specified by the :MMEM:DEST
command. File name is specified by
:MMEM:NAME command.
To Next Page
Loading...
Need help?
General
