Agilent Technologies 4155C Command Reference

5-84 Agilent 4155C/4156C SCPI Command Reference, Edition 1
SCPI Commands
:PAGE:CHANnels[:CDEFinition]:DEFault
:PAGE:CHANnels[:CDEFinition]:DEFault
This command sets the measurement and stress setup to the same state as after *RST
is executed.
This command does not affect the setup parameters of SYSTEM page group except
the following:
PRINT SETUP all settings
COLOR SETUP PLOTTER PEN NO.
MISCELLANEOUS COMMAND SET
This command does not have query form.
Syntax :PAGE:CHANnels [ :CDEFinition] :DEFault
Example OUTPUT @Hp4155;":PAGE:CHAN:DEF"
:PAGE:CHANnels[:CDEFinition]:GNDU:DISable
This command deletes the settings of GNDU.
This command does not have query form.
Syntax :PAGE:CHANnels [ :CDEFinition] :GNDU:DISable
Example OUTPUT @Hp4155;":PAGE:CHAN:GNDU:DIS"
:PAGE:CHANnels[:CDEFinition]:GNDU:MODE?
This command returns the output MODE of GNDU.
This command has query form only.
Syntax :PAGE:CHANnels [ :CDEFinition] :GNDU:MODE?
Query response COMM | DIS <newline><^END>
When the GNDU is not used, the response data may be DIS(DISable).
Example OUTPUT @Hp4155;":PAGE:CHAN:GNDU:MODE?"
ENTER @Hp4155;A$

Agilent Technologies 4155C Specifications

General

Brand	Agilent Technologies
Model	4155C
Category	Measuring Instruments
Language	English